• image
  • Postgraduate

      postgraduate in the Department                     Accepted Student Master\'s thesis&Ph.D     Postgraduate in control and systems engineering department has been founded in (1975-1976) in order to create specialized staffs to keep pace with the industrial developments in that time. First cycle of Higher Diploma in Applied Computer Engineering has been first opened and it was only one year to get higher diploma certificate.   Six cycles have been graduated since (1982-1981) ,the number of graduates was (102).then a common study in form of institute was established between the university of technology and the national center of computers (which was linked with the ministry of planning at that time) and then it linked with the ministry of higher education and research (today it is called as Iraqi Commission for Computers and Informatics ).   In the year (1976-1977), the department opened the master's study in control and instruments engineering as well as computers engineering. Ph.D. study in control and computers engineering has been opened in 1995 and master's study in mechatronics engineering has been introduced in 1996 and Ph.D. study for the same discipline in 2002. Since the late nineties, there were three courses graduation for   doctorate degree and three for master’s degree for the three fields:   1-    Control and Instruments Engineering. 2-    Computer Engineering. 3-    Mechatronics Engineering.     The terms to be eligible for acceptance in the postgraduate study In order to apply to the post graduate study (Master degree) in the department the applicant should have a Bachelor degree in control and systems engineering in one of the department's three specialties: control, computer, mechatronics, and have   no less than 65% as an average within the first quarters of graduates in his year of graduation and that according to the instructions issued by the ministry of higher education and scientific research. While in order to get a doctorate degree  it has been  required from the applicant to have a Master degree in the  desired field  and because of the exceptional  circumstances that  the country has been through, the doctorate study has been suspended   since the year(  2003-2004), the master study  also suspended for the academic  year  (2005-2006),and then the Master study for the Mechatronics engineering has been re-opened for the academic year (2010-2011)and (7)students has been admitted that year and the year after that the master study for the computer  engineering also re-opened for a total number of admitted students (11),While the admission procedure continued for the Master study In Mechatronics engineering and( 13) student were eligible  for acceptances .For the academic year  ( 2012-2013) the department admitted (10 )students for the postgraduate study.   Hence the re-opening of the post graduate study requires   the availability of at least  the minimum number of advanced  teaching staff ,the instruments ,and the financial allocations. And there are good indicators encourages the re-opening of the master study in Control and Mechatronics fields for the academic year (2014-2015).                         

  • image
  • syllabus

      Teaching Strategies for All Stages Teaching Strategy for The First Stage - Control Engineering Branch. Teaching Strategy for The First Stage-Computer Engineering Branch. Teaching Strategy for The First Stage- Mechatronics Engineering Branch.  Teaching Strategy for The First Stage - Medical Control System Engineering Branch. Teaching Strategy for The Second Stage- Control Engineering Branch. Teaching Strategy for The Second Stage- Computer Engineering Branch. Teaching Strategy for The Second Stage- Mechatronics Engineering Branch. Teaching Strategy for The Second Stage- Medical Control System Engineering Branch. Teaching Strategy for The Third Stage - Control Engineering Branch. Teaching Strategy for The Third Stage - Computer Engineering Branch. Teaching Strategy for The Third Stage - Mechatronics Engineering Branch. Teaching Strategy for The Third Stage - Medical Control System Engineering Branch. Teaching Strategy for The Fourth Stage - Control Engineering Branch. Teaching Strategy for The Fourth Stage - Computer Engineering Branch. Teaching Strategy for The Fourth Stage - Mechatronics Engineering Branch. Teaching Strategy for The Fourth Stage - Medical Control Engineering Branch.

  • image
  • alumni

         Alumni  Year Phd Msc Higher Diploma Bachelor 2018 2017           2016           2015          2014          2013         2012         2011         2010         2009          2008         2007         2006         2005         2004         2003         2002         2001           2000        

  • image
  • graduation projects

           Graduation Projects Preliminary studies Graduation projects for the academic year 2016 - 2017 Graduation Projects  for the academic year 2015 - 2016 Graduation Projects  for the academic year 2014 - 2015 Graduation Projects for the academic year 2013 - 2014  Graduation Projects for the academic year 2012 - 2013  Graduation Projects for the academic year 2011 - 2012 Graduation Projects for the academic year 2010 - 2011 Graduation Projects  for the academic year 2009 - 2010      

  • image
  • accoumplished

              Graduate Studies Certifications   Language Date  Name Arabic 2017/3/8 Abdul Sattar Abdul Jabbar Arabic 2017/3/31 Zine El Abidine Mohamed Sherif Arabic 2017/3/31 Mostafa Hussein Meshary Arabic 2017/4/13 Akram Hashem Hamid Arabic 2017/4/13 Louay Thamer Rashid Arabic 2017/4/25 Marwa Mohammed Alwan Arabic 2017/6/12 Muntader Mohammed Saleh Arabic 2017/7/31 Rasha Shehab Mohammed Arabic 2017 Jinan Jabbar Abdul Karim Arabic 2017 Tabbar Hatem Mohamed English 2017/7/17 Marwa Mohammed Alwan English 2017/7/26 Mostafa Hussein Meshary English 2017/7/31 Rasha Shehab Mohammed English 2017/7/31 Rana Diaa Abdul Karim English 2017/10/21 Jinan Jabbar Abdul Karim English 2017/11/15 Tabbar Hatem Mohamed     Primary Studies Certifications   Date  Name 2017/9/27 Ahmed Hassan Mohamed Habib 2017/10/4 Mohammed Yassin Khudair 2017/4/10 Shaima Selim Ibrahim 2017/11/2 Mohamed Helal Mohamed Raouf 2017/4/13 Tabark Hatim Mohammed Ali 2017/12/4 Abdullah Ali Mohammed Wahid 2017/12/5 Ali Amer Abdul Salman 2017/12/5 Alaa Ziad Tariq 2017/12/4 Mamoun Abdullah Hammad 2017/12/4 Shahad Samuail Aswad 2017/12/4 Zaid Ahmed Badran 2017/12/4 Omar Khawam Ahmed 2017/12/4 Mohamed Abdel Moneim Abdel Amir 2017/12/4 Mustafa Jabbar Mira  

  • image
  • lectures

          Instructions for writing graduation project Graduation project template                     Control Branch Computer Branch Mechatronics Branch Medical Control Branch

 

Automation and Robotics Research Unit

 

  

 

 

The fields of mechatronics, automation and robotics engineering have witnessed a rapid development and an increasing demand for their applications in industrial, agricultural, educational and medical fields. The Department of Control and Systems Engineering decided to form a research unit specialized in the design and execution of advanced research in automation and human robot applications since it possessed a specialized staff with advance expertise in these fields. The unit aims to acquaint the concerned parties with the importance of introducing modern automation techniques and robotics in various aspects of life to facilitate and improve the performance of many vital activities in society.

Objectives of the Unit

Staff Of The Unit

Photo Gallery

 

 

                                                                                                                                                         

 A Training Course Entitled "Handling Errors that Occur when Sending and Receiving Digital
 Seminars of Postgraduate Students    On the 14th of May 2019, the Control and Systems
 A Seminar Entitled "Developments of Cellular Networks: Horizons and Applications"    On
 Master Dissertation Discussion (Noor Mohammad Mehdi)  The graduate student in the
 A team from the Control and Systems Engineering Department Wins the Explorer Robot Competition
 Sports Festival         On Sunday, the 10th of March 2019, the Control and Systems
 An Honorary Ceremony     Under the patronage of the Head of the Department, Asst. Prof.
A Humanitarian Visit for Children with Cancer       As part of the humanitarian and
 A Student Festival and Competition Entitled "Your Project in Three Minutes       For the
 A Training Course Entitled "Academic Presentations"  On Sunday, the 21st of April 2019,

Announcements and upcoming events

cache/resized/4af05dbeec45d212e7105b0ac34f3e77.jpg
17 February 2019
Postgraduate Students / Course Stage            
cache/resized/2d9fe650c076ddde4d5856f8c0bdac9c.jpg
05 February 2019
Background The required majors for applicants for
cache/resized/9d6d9fa1a7765508f2a30de0ec94c493.jpg
30 January 2019
Table of laboratory examinations for the first
cache/resized/70e9ec19ad9093c1bd16a62a68fe7d96.jpg
29 January 2019
Table of final exams for the first semester of
cache/resized/73d036bc977c81bda52ab0bd672f46e2.jpg
15 January 2019
Study loans with soft benefits from the Iraqi
08 January 2019
Final Exam Schedule for Graduate Students here
09 December 2018
Announcement of the honoring ceremony 2017-2018
04 December 2018
Master students    
22 November 2018
Master students      
12 November 2018
Master students    
04 November 2018
A meeting with the students of the first stage
10 October 2018
Final Exam results for 2017-2018  
03 October 2018
Schedule of weekly lessons for the academic year

Top students

dept.Library        Automation and Robotics Research Unit        Legal Unit             Committees              Quality Divisi

We have 90 guests and no members online

Top